Limited Time Offer!
Selling Price -$219,000.00
Selling Price -
$219,000.00
2021 Hyundai HX350AL
304hp Cummins diesel, 76,600lbs, Wedge style quick change.
Accurate bucket and thumb.
Engine: Cummins L9 (Tier 4 Final/Stage V).
Horsepower: ~304 hp.
Operating Weight: 78,000 lbs (35 metric tons).
Max Digging Depth: Over 24 feet.
Max Digging Reach: Over 36 feet.
Bucket Capacity: Around 2.34 cubic yards (or 1.44 cubic meters).
Bucket Force: High breakout force (around 48,722 lbs).
Operator Comfort: Enclosed cab with A/C, heater
304hp Cummins diesel, 76,600lbs, Wedge style quick change.
Accurate bucket and thumb.
Engine: Cummins L9 (Tier 4 Final/Stage V).
Horsepower: ~304 hp.
Operating Weight: 78,000 lbs (35 metric tons).
Max Digging Depth: Over 24 feet.
Max Digging Reach: Over 36 feet.
Bucket Capacity: Around 2.34 cubic yards (or 1.44 cubic meters).
Bucket Force: High breakout force (around 48,722 lbs).
Operator Comfort: Enclosed cab with A/C, heater
- 2021
- Hyundai Construction Equipment
- Crawler Excavators
- HX350A L
- Crawler
- Cummins L9
- J1995 (gross): 310 HP (231 kW) at 2,100 rpm | J1349 (net): 304 HP (227 kW) at 2,100 rpm | Max. Power: 325 HP (242 kW) at 1,800 rpm
- 4-cycle turbocharged, charge air-cooled, diesel engine | Throtle: Electric, dial type
- No. of cylinders bore X stroke: Boom: 150×1,480 ST | Arm: 160×1,685 ST | Bucket: 140×1,285 ST
- 1126 Ib·ft (1,526 N·m) at 1,400 rpm
- Tier 4F/ Stage V Emission Certified
- Piston: 8,900 cc (543 cu in)
- Implement circuits: 350 kgf/cm2 (4,980 psi) | Travel circuit: 350 kgf/cm2 (4,980 psi) | Power Boost (Boom, Arm, Bucket) 380 kgf/cm2 (5,400 psi) | Swing circuit: 300 kgf/cm2 (4,270 psi) | Pilot circuit: 40 kgf/cm2 (569 psi) | Service valve: Installed
- Two levers with pedals
- 2 × 12 V × 160 Ah
- 24 V - 4.8 kW
- 24 V - 95 A
- Max. drawbar pull: 27,404 kgf (60,415 lbf)
- Swing speed: 10.2 rpm
- Max. travel (high)/(low): 6.4 km/hr (3.98 mph) / 3.5 km/hr (2.17 mph)
- Operator sound pressure (ISO 6396:2008): 70 dB(A) | Exterior sound power (ISO 6395:2008): 98 dB(A)
- Variable displacement piston pumps
- 2×277.2 l/min (73.2 U.S. gpm) | Sub-pump for pilot circuit: Gear pump | 2 Way: 26.4 gpm / (100 lpm) | Rotating: 15.9 gpm / (60 lpm)
- 2 way: 2,611 psi / (180 bar) | Rotating: 4,062 psi / (280 bar)
- Drive method: Fully hydrostatic type | Drive motor: Axial Piston Motor, In-Shoe Design | Gradeability: 35° (70%) | Parking brake: Multi wet disc | Swing brake: Multi wet disc brake | Swing bearing lubrication: Grease-bathed | Pilot control: Two joysticks with one safety lever | (LH): Swing and arm | (RH): Boom and bucket (ISO) | Swing motor: Fixed displacement axial piston motor | Reduction system: Planetary reduction gear | Center frame: X - leg type | Track frame: Pentagonal box type | No. of track shoes on each side: 48 EA | No. of upper rollers on each side: 2 EA | No. of lower rollers on each side: 9 EA | No. of rail guard on each side: 2 EA
- Tail-swing radius: 3,570 mm (11' 7") | Track gauge: 2,680 mm (8' 10") | Tumbler distance: 4,030 mm (13' 3") | Track gauge: 2,600 mm (8' 6") | Max. digging reach: 10,020 mm (32' 10") 10,330 mm (33' 11") 10,550 mm (34' 7") 11,140 mm (36' 7") 11,950 mm (39' 2") | Max. digging reach on ground: 9,800 mm (32' 2") 10,110 mm (33' 2") 10,330 mm (33' 11") 10,940 mm (35' 11") 11,760 mm (38' 7") | Max. digging depth: 6,160 mm (20' 3") 6,370 mm (20' 11") 6,670 mm (21' 11") 7,370 mm (24' 2") 8,220 mm (26' 12") | Max. digging depth (8' level): 5,950 mm (19' 6") 6,160 mm (20' 3") 6,470 mm (21' 3") 7,210 mm (23' 8") 8,080 mm (26' 6") | Max. vertical wall digging depth: 5,710 mm (18' 9") 5,980 mm (19' 7") 5,920 mm (19' 5") 6,360 mm (20' 10") 7,260 mm (23' 10") | Min. swing radius: 4,520 mm (14' 10") 4,700 mm (15' 5") 4,550 mm (14' 11") 4,460 mm (14' 8") 4,470 mm (14' 8")
- 107 mm (4.21")
- 124 mm (4.88")
- of counterweight: 1,200 mm (3' 11") | Min: 500 mm (1' 8")
- 11,170 mm (36' 8") 11,470 mm (37' 8") 11,340 mm (37' 2") 11,220 mm (36' 10") 11,220 mm (36' 10") | of crawler: 4,940 mm (16' 2")
- Rear-end: 3,505 mm (11' 5") | Boom: 6,150 mm (20' 2") 6,450 mm (21' 2") | Arm: 2,200 mm (7' 3") 2,200 mm (7' 3") 2,500 mm (8' 2") 3,200 mm (10' 6") 4,050 mm (13' 3")
- 3,280 mm (10' 9") 3,380 mm (11' 1") 3,480 mm (11' 5") 3,580 mm (11' 5") | of upper structure: 2,980 mm (9' 9") | Superstructure: 2,980 mm (9' 9")
- Track shoe: 600 mm (24") 700 mm (28") 800 mm (32") 900 mm (36") | Track shoe standard: 800 mm (31' 5")
- of cab: 3,160 mm (10' 4") | of boom: 3,680 mm (12' 1") 3,740 mm (11' 11") 3,760 mm (12' 0") 3,380 mm (11' 1") 3,860 mm (12' 8") | of guardrail: 3,350 mm (11' 0") | of engine hood: 2,600 mm (8' 6")
- Max. digging: 9,940 mm (32' 7") 10,220 mm (33' 6") 10,170 mm (33' 4") 10,310 mm (33' 10") 10,710 mm (35' 2") | Max. dumping: 6,780 mm (22' 3") 7,050 mm (23' 2") 7,050 mm (23' 2") 7,240 mm (23' 9") 7,630 mm (25' 0")
- tank: 600 L (154.7 gal)
- engine: 55 L (14.5 gal)
- engine: 30 L (7.9 gal)
- (each) 7.8 L (2.06 gal)
- tank: 210 L (54.1 gal) | System: 414 L (106.7 gal) | Swing device: 11 L (2.91 gal) | DEF/AdBlue®: 70 L (18.5 gal)
- Triple Grouser: 600 mm (24") HX350AL: 35,010 kg (77,184 lbs) - 0.65 kgf/cm2 (9.22 psi) | 700 mm (28") HX350AL: 35,530 kg (78,330 lbs) - 0.57 kgf/cm2 (8.04 psi) | 800 mm (32") HX350AL: 35,910 kg (79,670 lbs) - 0.50 kgf/cm2 (7.11 psi) | 900 mm (36") HX350AL: 36,300 kg (80,027 lbs) - 0.45 kgf/cm2 (6.39 psi) | Double Grouser: 700 mm (28") HX350AHW: 37,800 kg (83,330 lbs) - 0.62 kgf/cm (8.85 psi)
- HHKHK903VE0000079
- $219,000.00
- Abbotsford, British Columbia
- Pre-Owned
- 2021
- Hyundai Construction Equipment
- Crawler Excavators HX350A L
- Cummins L9
- 304
- 2937
- Diesel
- Available
- Track shoe: 600 mm (24") 700 mm (28") 800 mm (32") 900 mm (36") | Track shoe standard: 800 mm (31' 5")
- Max. digging: 9,940 mm (32' 7") 10,220 mm (33' 6") 10,170 mm (33' 4") 10,310 mm (33' 10") 10,710 mm (35' 2") | Max. dumping: 6,780 mm (22' 3") 7,050 mm (23' 2") 7,050 mm (23' 2") 7,240 mm (23' 9") 7,630 mm (25' 0")
- HHKHK903VE0000079